Operator's Manual

Pre-Maintenance
Procedures
Disconnectingthe
Spark-PlugWire
Beforeperforminganymaintenanceontheengine,
belt,orcuttingblades,disconnectthespark-plugwire
fromthesparkplug(Figure15).
g252737
Figure15
1.Spark-plugwire
Lubrication
LubricatingtheSlicer-Shaft
Bearings
ServiceInterval:Every25hours—Greasethe
slicer-shaftbearings.
1.Shutofftheengine,waitforallmovingpartsto
stop,andremovethespark-plugwire.
2.Engagetheparkingbrake.
3.Lubricatethettings(Figure16)with1or2
pumpsofNLGIgradeNo.2multi-purpose
grease.
g021348
Figure16
1.Greasetting
19