Operator's Manual

RemovingtheBlade
Replacethebladeifithitsasolidobject,ifthebladeis
outofbalance,orifabladeisbent.T oensureoptimum
performanceandcontinuedsafetyconformanceof
themachine,usegenuineT ororeplacementblades.
Replacementbladesmadebyothermanufacturers
mayresultinnonconformancewithsafetystandards.
Note:Flailbladesaresharpenedon2sides,soyou
canturnoverabladewhenyouremoveitforanew
sharpedge
FlailBladeOnly
1.Holdthebladeendusingaragorathickly
paddedglove.
2.Removethebladebolt,thecurvedwasher,and
bladefromtheblademountonthebottomofthe
spindle-cupassembly(Figure36).
g187214
Figure36
1.Nut
5.Curvedwasher
2.Flail6.Blade
3.Flailbolt
7.Spindle-cupassembly
4.Bladebolt
3.Toremoveonlytheailblades,removetheails
fromthebladebyremovingtheailboltandnut
fromeachail.
StraightBladeOnly
1.Holdthebladeendusingaragorthickly-padded
glove.
2.Removethebladebolt,curvedwasher,and
bladefromthespindlecupassembly(Figure37).
g189023
Figure37
1.Blade3.Bladebolt
2.Curvedwasher
SharpeningtheBlade
1.Usealetosharpenthecuttingedgeatboth
endsoftheblade(Figure38).
Note:Maintaintheoriginalangle.
Note:Thebladeretainsbalanceifthesame
amountofmaterialisremovedfrombothcutting
edges.
g192119
Figure38
1.Sharpenattheoriginalangle
27