Operator's Manual

Figure35
1.Broom-clutchassembly
3.3.2mm(1/8inch)
2.Tab
AdjustingtheBroomDrive
Ifthebroomcableisnotproperlyadjusted;refertoChecking
theBroomCable(page23),andthenperformthefollowing
steps:
1.Loosenthejamnut(Figure36).
Figure36
1.Jamnut2.Turnbuckle
2.Loosenortightentheturnbucklethatadjuststhe
tensiononthecable(
Figure36).
3.Adjusttheturnbuckleuntilthegapbetweenthebroom
clutchassemblyandthetabis3.2mm(1/8inch)
(Figure35).
4.Tightenthejamnut.
5.Ifthebroomcableisproperlyadjustedbutaproblem
remains,contactyourAuthorizedToroServiceDealer.
MaintainingtheBelts
CheckingtheConditionoftheBelts
ServiceInterval:Every50hours
1.Removetheknobandwasherthatsecurestheengine
coverandthebeltcovertomachine(Figure37).
Figure37
1.Knob4.Platenut
2.Washer5.Beltcover
3.Enginecover
2.Checkthe2beltsfordamageorwear.
Note:Replaceanydamagedorexcessivelyworn
belt(s).
3.Alignthebeltcoverandtheenginecovertothe
machineandtheplatenut(Figure37).
4.Securethebeltcoverandtheenginecovertothe
machinewiththeknobandwasher(
Figure37).
RemovingtheBroom-driveBelt
1.Removetheenginecoverandthebeltcoverfromthe
machine;refertostep1ofCheckingtheConditionof
theBelts(page24).
2.Removethe2boltsand2washersthatsecurethebelt
guidetothemachine,andremovethebeltguideand
thespacer(
Figure38).
Note:Thespacerislocatedbetweentheengineand
thepulleyshield.
24