Operator's Manual

2.LubricatethebroomanglelockpinttingwithNGLI
grade#2multi-purposegungrease.
Figure14
1.Broomanglelockpin
3.Removethebeltcoverandengineshield.
4.MovethespeedselectorlevertopositionR2.
5.Dipalong,clean,smalltippedpaintbrushin
automotiveengineoilandlightlylubricatethehex
shaft.Rockthemachineforwardandrearwardto
rotatethehexshaft.
Important:Donotgetoilontherubberwheelor
thealuminumfrictiondriveplateasthetraction
drivewillslip(Figure15).
Figure15
1.Aluminumfrictiondrive
plate
2.Hexshaft
6.Movethespeedselectorlevertoposition6.
7.Lubricatetheotherendofthehexshaft.
8.Movethespeedselectorleverforwardandrearward
afewtimes.
9.Installthebeltcoverandengineshield.
CheckingtheSparkPlug
ServiceInterval:Every160hours
Removethesparkplug,checktheconditionandresetthegap,
orreplacewithanewplug.SeeyourEngineOwner'sManual.
CheckingtheBroomCable
ServiceInterval:Aftertherst2hours
Yearly
1.Turnofftheengine,waitforallmovingpartstostop,
andremovethesparkplugwire(s).
2.Removethebeltcoverandengineshield.
3.Withthebroomleverdisengaged,ensurethegap
betweenthebroomclutchassemblyandthetabis3.2
mm(1/8inch).Ifthebroomisnotproperlyadjusted,
seeAdjustingtheBroomDrive(page18).
Figure16
1.Broomclutchassembly
3.3.2mm(1/8inch)
2.Tab
CheckingtheBroomShaft
ShearPin
ServiceInterval:Beforeeachuseordaily
1.Movethemachinetoalevelsurface.
2.Turnofftheengine,waitforallmovingpartstostop,
andremovethesparkplugwire(s).
3.Checktheshearpinlocatedonthebroomshafton
eithersideofthegearbox.
17