Operator's Manual

Figure17
1.Nut
2.Shearpin
4.Iftheshearpinisdamaged,removethepinandreplace
withaTororecommendedpin.Securethepinwith
anut.
CheckingtheBroomSegments
1.Movethemachinetoalevelsurface.
2.Turnofftheengine,waitforallmovingpartstostop,
andremovethesparkplugwire(s).
3.Raisethebroombyresettingthecasterpositions.
4.Onbothsidesoftheunit,removeandretaintheouter
bearinghousinghardware.
5.Manuallypullthepowerunitrearwardtoremovethe
broomassemblyfromtheunit.
6.Supportthesplinedshaftoneithersideofthegearbox.
7.Standthebroomcoreassemblyonendsothe
removableendretainerplateisfacingupward.
Figure18
1.Hardware
4.Supportshaft
2.Endretainerplate
5.Alignmentngers
3.Broomsegment
8.Removeandretainthehardwarefromtheendretainer
plate.
9.Removethedamagedbroomsegment(s).Installthe
newsegment(s)bystaggeringthemetalringalignment
ngersasshowninFigure18.
Important:Damagemayoccurtothebroom
assemblyifthebroomsegmentsarenotproperly
installed.
10.Installthebroomassemblyontotheunit.
Important:Makesurethebearingsetscrewsare
tightenedbeforeoperatingthebroom.
AdjustingtheTractionCable
Ifthemachinedoesnotdriveintheforwardorreversespeeds
oritdriveswhenyoureleasethetractionlever,adjustthe
tractioncable.
Withthetractionleverdisengaged,checkthepininthe
elongatedslotintheleftsideofthemachineabovethetire.
Thereshouldbeagapof6mm(1/4inch)fromthefrontof
theslottothefrontedgeofthepin(CheckingtheTraction
Cable(page16)).
Ifthelefthandtractioncableisnotproperlyadjusted,do
thefollowingsteps:
1.Loosenthejamnut.
2.Loosenortightentheturnbuckletoadjustthepinuntil
itisthepropergapfromthefrontedgeoftheslot.
3.Tightenthejamnut(
Figure19).
3
g019016
Figure19
1.Jamnut2.Turnbuckle
AdjustingtheBroomDrive
Ifthebroomcableisnotproperlyadjusted(seeCheckingthe
BroomCable(page17)),dothefollowingsteps:
1.Loosenthejamnut(Figure20).
18