Service Manual

TRACTION DRIVE SYSTEM
5. Remove both bolts that hold the wheel clutch
assembly to the housing.
6. Remove the extension springs. Unhook the spring
from the lower clutch collar and housing.
7. Remove the clutch cables. Rotate the shift collar up
to release tension on the clutch cable and maneuver
the Z-bend of the cable out of the upper clutch collar.
8. Unbolt the upper end of the shift brace from
the housing.
9. Remove both roller chains from the 32-tooth gears
and lift the wheel clutch assembly from the
traction unit.
Fig. 008
Fig. 009
Fig. 010
Fig. 013
Fig. 012
5-6
Walk-Behind Rotary Broom Service Manual
Fig. 011