Service Manual

SPECIFICATIONS & MAINTENANCE

2-3

Walk-Behind Rotary Broom Service Manual

Model 38700, 23740

Engine Kohler

208cc Command Pro Multi Season

Clearing Width 36” (11.0m)

Starter Recoil

Fuel Capacity 1 Gallon (4.1 L)

Engine RPM 3600 ± 100 PRM

Broom Speed 200 RPM

Direct Drive Speed 6/2 Variable Speed

Steering Power Steering - RH/LH Clutch

Oil Capacity .63 Qt (.06 L)

Weight 323 lbs (146.5kg)

Width 46.5” (118cm)

Length 73.0” (185.5cm)

Height 41.5” (105.5cm)

Tire Pressure 17-20 psi (117-138 kPa)

Broom Angle Adjustments 3 position 30° each direction

Checking the Sweeping Path

A broom sweeps with the tips of its bristles. When too

much down pressure is applied, the broom is no longer

using its tips; the broom is now working with the sides of

the bristles. This limits the icking action of the bristles,

sweeping effectiveness, and can decrease broom life.

1. Drive to a at dusty area and stop the machine.

2. With the engine running move the throttle midway

between Slow and Fast. Engage the broom and

allow the broom to sweep for approximately

30 seconds.

3. Disengage the broom and stop the engine.

4. Wait for all moving parts to stop before leaving the

operating position.

5. Turn the engine On/Off switch to the Off position.

6. Make sure the area swept equals the length of the

broom and a maximum width of 2 - 4” (51-102 mm).

7. Adjust the broom height if necessary.

Fig. 001

A. 2 – 4” (51-102 mm) Maximum Width

B. Length of Broom

C. Swept Area

Specications & Maintenance