Installation Instructions

FormNo.3421-154RevA

PipeBox

2226DirectionalDrill

ModelNo.23821

ModelNo.23821E

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

RemovingthePipeBox

1.Raisetheelevators.

2.Installthelower,innerpinsandhitchpinsonthepipebox(Figure1).

g240679

Figure1

1.Upperstraps2.Lower,outerpin3.Lower,innerpin

3.Lowertheelevators.

4.Parkthemachineonalevelsurface,placethethrustframeinthehorizontalposition,shutoffthe

engine,andremovethekey.

5.Verifythattheupperstraps(Figure1)areinstalled.

6.Removethelower,outerpins(Figure1)andremovethepipeboxwithahoistcapableoflifting2260kg

(5,000lb).

Note:Thelower,innerpinsmustbeinstalledwhenremovingthepipebox;otherwise,thepipewill

falloutofthebottomofthepipebox.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3421-154*A

PAGE 1
Form No. 3421-154 Rev A Pipe Box 2226 Directional Drill Model No. 23821 Model No. 23821E Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Removing the Pipe Box 1. Raise the elevators. 2. Install the lower, inner pins and hitch pins on the pipe box (Figure 1). g240679 Figure 1 1. Upper straps 2. Lower, outer pin 3. Lower, inner pin 3.
PAGE 2
Installing the Pipe Box Important: Ensure the elevators are completely lowered before installing pipe box onto the thrust frame. 1. Park the machine on a level surface, place the thrust frame in the horizontal position, shut off the engine, and remove the key. 2. Remove the upper straps from the pipe box (Box A of Figure 2). 3. Verify that the lower, inner pins are installed (Box B and C of Figure 2). 4. Carefully install the pipes into the pipe box (Box D of Figure 2). 5.