Operator's Manual

G022028
1
2
3
Figure113
1.Coolantlevel(atthe
bottomofthellerneck)
3.Coolant(50/50ethylene
glycolandwateror
equivalent)
2.Fillerneck
5.Installtheradiatorllercap,ensuringthatitistightly
sealed(Figure112).
6.Starttheengineandrunitathalfthrottlefor5minutes.
7.Stoptheengineandremovethekey.
8.Wait30minutes,thenchecktheuidlevelinthe
radiatorsightgauge;refertoCheckingtheCoolant
LevelintheRadiator(page85).
Note:Ifitislow ,addcoolant.
BeltMaintenance
ServicingtheEngine-Drive
Belt
WARNING
Contactingarotatingbeltcancauseseriousinjury
ordeath.
Stoptheengineandremovetheignitionkeybefore
workingnearbelts.
CheckingtheConditionoftheBelt
ServiceInterval:Every250hours
1.Parkthemachineonalevelsurface,stoptheengine,
andremovetheignitionkey.
2.Openthefronthood.
3.Inspectthebeltforcuts,cracks,loosecords,grease,oil,
twisting,orsignsofabnormalwear(Figure114).
Note:Replacethebeltifitisexcessivelywornor
damaged.
88