Sprinkler User Manual

ManualsBrandsToro ManualsHousehold Appliance24

MV/

PUMP

1 2 3 4 5 6 7 8 9 10 11 12

MV/

PUMP

1 2 3 4 5 6 7 8 9 10 11 12

VC/

COM

VC/

COM

13 14 15 16 17 18 19 20 21 22 23 24

VC/

COM

37 38 39 40 41 42 43 44 45 46 47 48

25 26 27 28 29 30 31 32 33 34 35 36

VC/

COM

VC/

COM

VC/

COM

VC/

COM

13 14 15 16 17 18 19 20 21 22 23 24

VC/

COM

Connecting the Station Wires

1. To provide a valve common connection, interconnect one control

wire (generally white) to either lead of each valve solenoid.

2. Connect a separate control wire to the remaining lead of each

valve solenoid. For reference, note the wire color used for each

valve connection, it’s corresponding watering zone and the

intended station number.

3. If a master valve or pump start relay is used, make this connection

in the same manner.

4. Route the control wires into the controller cabinet through the

large opening provided or through conduit if installed.

5. Cut wires back as necessary to provide an appropriate length for

connection. Strip 3/8”(10mm) insulation from each wire.

4. Insert the ground wire into the copper ground lug and tighten

securely.

Ground Rod

12" (30.5cm)

Valve Box

6 AWG Solid

Copper Wire

Note: Using 18 AWG (or larger) irrigation valve connection cable or

wire is recommended for all field wire connections.