Installation Instructions

FormNo.3407-261RevA

PlowMountCableGuideKit

RT1200Trencher

ModelNo.25407

ModelNo.25407E

InstallationInstructions

Note:ThemachinemustbeequippedwiththeVibratoryPlowKit.

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato

causecancer,birthdefects,orreproductiveharm.

PreparingtheMachine

1.Movethemachinetoalevelsurface.

2.Settheparkingbrakeandlowertheattachmentsto

theground.

3.Stoptheengineandremovethekey.

4.Removethehardwareontheshakerbox.

InstallingtheCableGuide

InstallingtheBrackets

Rightbracket

Leftbracket

Bolt5/16x1-1/4

inch

1x1x16x

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3407-261*A

PAGE 1
Form No. 3407-261 Rev A Plow Mount Cable Guide Kit RT1200 Trencher Model No. 25407 Model No. 25407E Installation Instructions Note: The machine must be equipped with the Vibratory Plow Kit. WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. Preparing the Machine Installing the Cable Guide 1. Move the machine to a level surface. 2.
PAGE 2
Assembling and Installing the Cable Guide Cable guide Clevis pin Hair pin Bolt (1/2-13 x 2 inch) Washer Spacers Locknut (1/2 inch) 1x 2x 2x 4x 4x 2x 4x Attaching the Cable Guide Assembly to the Brackets Bolt (3/8 x 1 inch) Flange nut (3/8 inch) 4x 4x 2