Operator's Manual

InstallingtheHydraulicHosesonthe
ProSneak365
1.Removethehosethatiscurrentlyinstalledontothe
rstportofthehydraulicgearpump,adda90-degree
connectortothehosetting,andconnectthehoseand
connectortothe15-inchhose(Figure26).
g025492
1 2 3 4 5 6
Figure26
1.Hose(15inch)
4.Hydraulicgearpump
2.Valve
5.Hose(previously
connectedtohydraulic
gearpump)
3.Hose(28inch)
6.Plowvalve
2.Connectthe15-inchhosetosideT-portonthevalve
3.Torquethehosettingsto74to88N-m(55to65
ft-lb).
4.Useacabletietosecuretheadaptertotheexisting
hoseunderthehydraulictank.
5.Connectthe28-inchhosetothehydraulicgearpump
andtotheP-portonthevave(Figure26).
6.Torquethehosettingsto74to88N-m(55to65
ft-lb).
7.Connect1hose(82inches)fromthevalvetothe
hydraulicmotorassembly(Figure27).
1 2 3 4 5 6
g025491
Figure27
1.Valve4.90-degreeswiveladaptor
tting
2.Hose(82inch)5.Straighttting
3.Hose(82inch)
6.Hydraulicmotorassembly
8.Torquethehosettingsto74to88N-m(55to65
ft-lb).
9.Connecttheother82inchhosefromtheothertting
onthevalvetothehydraulicmotorassemblyasshown
inFigure27.
10.Torquethehosettingsto74to88N-m(55to65
ft-lb).
11.Removethe2plowhosesthatareconnectedtothe
bulkheadplatelocatedbehindthepanelthatwas
removedfromthemachineandattachthemtothe
ttingsonthetoprowofthevalveasshowninFigure
28.
g025482
Figure28
12.Torquethehosettingsto27to32N-m(20to24
ft-lb).
13