Installation Instructions

ManualsBrandsToro ManualsTrenchersToro 25466E

FormNo.3378-118RevA

4ftand5ftManualCrumbers

RT1200Trencher

ModelNo.25465

ModelNo.25465E

ModelNo.25466

ModelNo.25466E

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Crumberbar

Crumberblade(6inches)

Crumberblade(8inches)

Carriagebolt(1/2x4inch)

Washer(1/2inch)

Locknut(1/2inch)

Spacer

Installthecrumber.

Note:Youshouldhaveeither2peopleorliftingequipment

toperformthisprocedure.

1.Parkthemachineonarm,levelsurface.

2.Movetheboomtothehorizontalposition.

3.Turnofftheengineandremovethekey.

4.Ifthespacebetweenthemountingplatesistoonarrow

toinsertthecrumberbarbetweenthem,loosenthe

4boltsandthe4locknutsthatsecurethecrumber

mountingbracketstotheboomenoughsothatyoucan

insertthecrumberbarbetweenthem(

Figure1).

g025236

Figure1

1.Crumbermountingbracket

(2)

3.Locknuts

2.Bolts

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3378-118*A

Summary of content (2 pages)

PAGE 1
Form No. 3378-118 Rev A 4ft and 5ft Manual Crumbers RT1200 Trencher Model No. 25465 Model No. 25465E Model No. 25466 Model No. 25466E Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. 1 1 1 2 2 2 1 Crumber bar Crumber blade (6 inches) Crumber blade (8 inches) Carriage bolt (1/2 x 4 inch) Washer (1/2 inch) Locknut (1/2 inch) Spacer Install the crumber.
PAGE 2
5. Loosely install the 4 hex-head bolts (M12 x 110 mm) and the 4 locknuts (M12) from the kit onto the plates, and insert the crumber bar between the plates and the bolts as shown in Figure 2. 4 Note: Torque the bolts and locknuts to 124 to 154 N-m (91 to 113 ft-lb). 3 2 1 2 1 5 2 3 6 G023428 Figure 3 The boom and chain are not shown. g025235 Figure 2 1. Locknut—M12 (4) 3. Mounting plates 2. Crumber bar 6.