Service Manual

ZT-2800
®
/ZT-3100/ZT-3400™ 45
ZT-3400 TRANSAXLE PARTS LIST
1 Housing, Main
2 Cover, Side
5 Plug 9/16-18 (Metal)
7 Screw, Hex head 1/4-20 x 1.25”
10 O-ring, -111,.103 x .424
11 Plug, 9/16-18 (Metal)
13 Sealant (Loctite 5900)
14 Oil, 20W50
20 Center Section
22 Plate, Bypass
23 Filter, Oil
24 Check Plug/Shock Valve
25 Check Plug/Shock Valve
26 Seal, Plug 1.250 x .250
27 Bolt, Center Section 3/8-16 x 1.5 (patch)
30 Seal, Lip .375 x .75 x .25
31 Ring, Retaining .375 External
32 Rod, Bypass
33 Ring, Retaining .750 Internal
34 Arm, Bypass
35 Ring, Retaining .375 External
40 Trunnion, Swashplate
41 Seal, Lip 18 x 32 x 7
42 Stud, Short 5/16-24
43 Puck, Friction
44 Arm, Control
45 Washer .34 x .88 x .06
46 Screw, Torx 5/16-24 x 1.00 (patch)
47 Nut, Hex Lock 5/16-24 UNF
50 Spring, Block
51 Washer, Flat .59 x .79 x .04
52 Shaft, Input
53 Bearing, Ball 17x40x12 Open 6203
54 Ring, Retaining Wire .561 I.D.
55 Washer 1.23 x 1.56 x .04
56 Seal, Lip 17 x 40 x 7
57 Ring, Retaining 2.06 Internal
60 Bearing, Thrust
64 Cylinder Block (Motor)
65 Bearing, Thrust Ball 30 x 52 x 13
69 Cylinder Block (Pump)
70 Washer .63 x 1.0 x .05
71 Ring, Retaining 62 External
72 Gear, Pinion (16T, 14T, 13T)
73 Shaft, Motor
74 Washer .72 x 1.16 x .04
80 Washer .5 x 1.0 x .03
81 Gear, Reduction (45T or 46T)
82 Gear, Reduction 11T
83 Pin, Jack Shaft
90 Ring, Retaining 2.06 Internal
91 Gear, Bull 54T
92 Spacer .750 x 1.320 x .257
93 Bearing, Ball .75 x 40 x 12
94 Shaft, Axle
95 Bearing, Ball
96 Seal, Lip
97 Hub
99 Nut, Patch Lock 3/4-16
100 Pawl, Brake
101 Shaft, Brake
102 Handle, Brake
103 Clip, Retaining
105 Screw, Hex Flange Head 1/4-20 x .75
106 Guard, Filter
109 Spacer
111 Fitting, STR 9/16-18 SAE .5 BARB
120 Fan 7.0 (10 Blade)
121 Pulley
121 Disc, Pulley
122 Nut, Hex Locking 1/2-20 Nylon
123 Washer, OD Slotted .53 x 1.63 x .0
123 HFHCS 1/4-20 x .75
123 HHCS 1/4-20 x .875
124 Pulley
130 Tube, Connecting
131 Gerotor Assembly
132 O-ring, -137, 0.103 x 2.050
133 Cover, Charge Pump
134 Screw, Hex Flange Head 1/4-20 x .75
135 Ball
136 Spring, Relief
137 Pin, Spring
140 Spacer .320 x 1.005 x .179
141 Arm, Neutral
142 SHCS 5/16-24 x 1 Patch
145 Assembly, RTN
146 Washer, .343 x 1.500 x .062
147 Spring, Extension
156 Cap, Axle
157 Seal, Lip 8 x 12 x 3 VC
159 Spring, Torsion
164 Spacer 1.719 x 2.039 x .02
165 Tube, Axle
166 Seal, Plug .64 x .25
200 Kit, Seal
201 Kit, Center Section
202 Kit, Charge Relief
203 Kit, Charge
207 Kit, Fan and Pulley
209 Puller, Hub
210 Kit, Input Shaft
211 Kit, RTN Control Arm
212 Kit, Axle Shaft