Specifications

8
2015 Toro Commercial Equipment Guide 15-003-T Rev. 4/15
Groundsmaster
®
360 2WD Specifications
*
The Groundsmaster 360 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
CUTTING DECKS
HEIGHT OF CUT
1”-6” (25 - 152 mm) adjustable in 0.25” (6 mm) increments
72” SIDE DISCHARGE CONST.
7-gauge (4.5 mm) 5.5” steel (14 cm) deep; welded deck with grass discharged on the right side. An 5/16” (8 mm) thick rubber discharge chute covers the discharge
opening to limit the throw distance of clippings.
72” BASE DECK CONST.
7-gauge (4.5 mm) 4.25” steel (11 cm) deep; welded deck. Requires Guardian® Recycler® or rear discharge completion kit.
FINE CUT GUARDIAN
®
COMPLETION KIT
Three deflectors inside the chamber redirect clippings that are elevated in the chambers so that they are cut and re-cut. Deck chambers prevent throwing of objects
out from deck.
SPINDLE ASSEMBLY
Ductile cast iron 9" (23 cm) diameter conical spindle housing; Dual greaseable tapered roller bearings; Spindle shaft is 1.25" (3.2 cm) diameter, solid cold finished
steel, and splined connection between spindle shaft and pulley; Welded blade retainer plus anti-scalp cups.
CUTTER DRIVE
Isolation mounted, splined PTO-driven gearbox transfers power to three separate spindles via two separate "B" section belts.
BLADES
Three 0.25” (6 mm) thick, 2.5” (63 mm) wide, heat-treated steel blades.
DECK SUSPENSION
Frame which supports deck via 4 vertically suspended chains. Front drag links provide fore/aft and left/right stability. Hydraulic deck lift includes load holding check
valves and gravity lower. Weight transfer system consisting of two torsion springs counterbalances some cutting deck weight to reduce turf damage.
BELT IDLER
Spring loaded (torsion) idler.
DECK SKID
Replaceable, bolt-on, non-marking UHMW skid on both sides for Base decks and on left side on side discharge decks. Interchangeable left to right on base decks.
ANTI-SCALP CUPS
Anti-scalp cup located on each blade spindle.
DECK OPTIONS
WIDTH OF CUT
Base: 72” (183 cm) with Guardian
®
kit, fine cut
Guardian kit, or rear discharge kit
Side Discharge (non-CE): 72” (183 cm)
BLADE TIP SPEED
@ 3250 ENGINE RPM
16,000 ft ± 1,000 ft./min
(4877 m ± 305 m/min)
18,000 ft ± 1,000 ft./min
(5486 m ± 305 m/min)
RUBBER DISCHARGE CHUTE
NA Yes, 5/16” (8 mm) thick
CUTTING DECK DEPTH
4.25” (108 mm) 5.5” (140 mm)
DECK ANTI-SCALP ROLLERS
4 5
BUMPER SKIDS
2 1
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
CUTTING DECK SPECIFIC ACCESSORIES FOR 72” SIDE DISCHARGE DECK (NON-CE)
RECYCLER KIT
Model 30347
LEAF MULCHING KIT
Part No. 108-5273
MEDIUM FLOW BLADE
Part No. 110-0621-03
HIGH FLOW BLADE
Part No. 110-0622-03
ATOMIC MULCHING BLADE
Part No. 110-0624-03
BLADE AND BELT KIT
Part No. 105-7272
CUTTING DECK SPECIFIC ACCESSORIES FOR 72” BASE DECK
72" FINE CUT GUARDIAN
RECYCLER COMPLETION KIT
Model 30346
72" GUARDIAN RECYCLER
COMPLETION KIT
Model 30304
72" REAR DISCHARGE
COMPLETION KIT
Model 30549
STANDARD BLADE
Part No. 108-1958
FLAT BLADE
(72” Rear Discharge Guardian Deck Only) Part No. 112-9586
TALL GRASS BAFFLE KIT
Improves cut of tall grass with seed heads. Part No. 105-7269
STANDARD BLADE
& BELT KIT
Part No. 105-7271