Operator's Manual

2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Placealongstraightedgeontopoftheenginedeck
asshowninFigure55.
4.Atthecarrierframecrosschannel,measurethe
heightatlocationA(Figure55).Thismeasurement
mustbe1-5/16inch(33mm),plusorminusa1/4
inch(6mm).
5.IftheheightatlocationAisnotcorrect,adjustment
isneeded.
6.Loosenthecarrierframemountingboltsonboth
sidesofthemachine(Figure55).
7.Alignthecarrierframeandenginedecktomatch
1-5/16inch(33mm),plusorminusa1/4inch(6
mm)atlocationA(Figure55).
8.Tightenthecarrierframemountingboltsonboth
sidesofthemachine.
Figure55
1.CarrierFrame4.LocationA,1-5/16inch
(33mm)±1/4inch(6mm)
2.Topofenginedeck5.Straightedge
3.Carrierframemounting
bolts
6.Carrierframecross
channel
CheckingtheEngineDeckHeight
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Adjustthetirepressureinthereartiresto
specications;refertoDriveSystemMaintenance
,page29.
4.MeasureenginedeckheightatlocationA(Figure56).
5.MeasureenginedeckheightatlocationB(Figure56).
6.IftheheightatlocationAandBarenotthesame,
changetirepressureslightlytomakethemthesame.
Figure56
1.Backviewofmachine
3.Tires
2.Topofenginedeck4.Sameheightatlocations
AandB
CheckingtheCarrierFrame
Front-to-RearPitch
Thecarrierframemusthaveapitchbetween1/8inch
(3mm)to3/8inch(9mm)overthelengthof24inches
(61cm)onthecarrierframe(Figure57).
1.Measureout24inches(61cm)onthecarrierframe
(Figure57).
Figure57
1.CarrierFrame
4.HeightatlocationsAand
B
2.1/8inch-3/8inch(3-10
mm)pitchover24inch(61
cm)length
5.CasterWheel
3.24inches(61cm)6.Casterspacers
2.MeasurecarrierframeheightatlocationA
(Figure57).
3.MeasurecarrierframeheightatlocationB
(Figure57).
43