Service Manual

HYDROSTATIC DRIVE SYSTEM
6-12 Floating Deck Mid-Size Service Manual
6
Hydraulic Pump Removal
1. Clean the area around the pump and hydraulic
fi ttings to prevent dirt and debris from entering the
system.
2. Remove the idler spring to relieve tension from the
hydro drive belt (Fig. 0975).
4. Loosen the two pulley hub set screws (Fig. 0977).
Fig 0975 PICT-0402
Fig 0977 PICT-0405a
5. Slide the pulley off the hydraulic pump shaft (Fig.
0978).
3. Slip the hydro drive belt off the pulley (Fig. 0976).
Fig 0978 PICT-0406
Fig 0976 PICT-0403