Service Manual

GEAR DRIVE
7-6 Floating Deck Mid-Size Service Manual
7
Gear Drive Idler Installation
3. Install the idler spring onto the idler arm (Fig. 1070).
1. Install 2 fl ange bushings into the idler arm pivot (Fig.
1068).
Fig 1070 PICT-1501
Fig 1068 PICT-1508
2. Install the pulley to the idler arm with a bolt and nut.
The pulley hub is installed facing the idler arm (Fig.
1069).
Fig 1069 PICT-1504a
9. Remove the 2 fl ange bushings from the idler arm
(Fig. 1067).
Fig 1067 PICT-1506a