Operator's Manual

Figure45
Shownfromthefront
1.Rightsidemotioncontrol
leverpivotshownunder
controls
3.1/8inch(3mm)gap
neededbetweenswitch
andcontrollever
2.Rightsidemotioncontrol
lever
4.Switch
AdjustingtheNeutralPostionforthe
MotionControlLevers
Important:Ensurethetrackingofthemoweris
correctafteradjustingthemotioncontrollevers.
Afteradjustingthetracking,themotioncontrol
leversmaynotaligntheexactlyfronttoback
(
Figure46).
Ifthemotioncontrolleversdonotalignfronttoback,
ortherightsidecontrolleverdoesnotmoveeasilyinto
theneutrallockposition,adjustmentisrequired.Adjust
eachleverandcontrolrodseparately.
Note:Adjustthehorizontalalignmentbeforethefront
tobackalignment.
1.Afterthehorizontalalignmentisnished,checkthe
fronttobackalignment(
Figure46).
Figure46
1.Leftmotioncontrollever
3.Neutrallockedposition
2.Rightmotioncontrollever4.Alignthecontrollevers
fronttobackhere
2.Loosenthewingnutsontherightcontrolrodand
rotatetheturnbuckleinorouttoensuretheright
sidecontrolleveriscenteredintheneutrallock
position.Securetheturnbuckleinpositionwiththe
wingnuts(Figure47).
3.Loosenthewingnutsontheleftcontrolrodand
rotatetheturnbuckleinorouttochangethetracking.
Securetheturnbuckleinpositionwiththewingnuts
(
Figure47).
Figure47
1.Turnbuckle
3.Topwingnut(lefthand
threaded)
2.Bottomwingnut
4.Checkforpropertracking.Adjusttheleftcontrol
rodifachangeisneeded.RefertoAdjustingthe
TrackingintheOperationSection.
37