Parts Catalogue

Commercial Walk-Behind Mower
15HP T-Bar Hydro Drive
Parts Catalog
Form Number 3359-489 Rev A
®
© The Toro Company - 2007
All Rights Reserved
To order replacement parts, please supply the part
number, the quantity, and the description of each part
desired.
Each Identified part in an illustration has a reference
number. The reference number for a part also
appears in the parts list, along with other information
about the part.
This catalog uses two special reference number
formats, one to indicate parts in a service assembly
and another to indicate the quantity of a given part in
an illustration.
Parts in service assemblies have reference numbers
in the form a:b. The a represents the reference
number of the entire service assembly and the b
represents a sequential number unique to each part
within the service assembly.
Ordering Replacement Parts
Understanding Reference Numbers
Service Assembly Reference Numbers
For example, a wheel assembly might be identified
by reference number 6, the tire by 6:1, the valve by
6:2, and the wheel by 6:3. When you order the
assembly identified by reference number 6, you
receive all parts identified by reference numbers 6:1,
6:2, and 6:3. However, you may also order any part
individually. Reference numbers of this type appear
in illustrations and in part lists.
In an illustration, if a reference number indicates
more than one part, the reference number has the
form nX y. The n represents the quantity of the part,
the X is the multiplication symbol, and the y
represents the reference number.
For example, in an illustration, the reference number
2X 37 means that two of the parts identified by
reference number 37 are indicated.
Reference Numbers Indicating Quantity
with 91cm TURBO FORCE Cutting Unit
Register your product at www.Toro.com
Model No. 30032 - 280000001 and up.