Operator's Manual

3.Adjustthetirepressureinthereartiresto
specications;referto,page.
4.MeasureenginedeckheightatlocationA(Figure56).
5.MeasureenginedeckheightatlocationB(Figure56).
6.IftheheightatlocationAandBarenotthesame,
changetirepressureslightlytomakethemthesame.
Figure56
1.Backviewofmachine
3.Tires
2.Topofenginedeck4.Sameheightatlocations
AandB
CheckingtheCarrierFrame
Front-to-RearPitch
Thecarrierframemusthaveapitchbetween1/8inch
(3mm)to3/8inch(9mm)overthelengthof24inches
(61cm)onthecarrierframe(Figure57).
1.Measureout24inches(61cm)onthecarrierframe
(Figure57).
Figure57
1.CarrierFrame
4.HeightatlocationsAand
B
2.1/8inch-3/8inch(3-10
mm)pitchover24inch(61
cm)length
5.CasterWheel
3.24inches(61cm)6.Casterspacers
2.MeasurecarrierframeheightatlocationA
(Figure57).
3.MeasurecarrierframeheightatlocationB
(Figure57).
4.TheheightatlocationAmustbean1/8-3/8inch(3
mm-10mm)lowerthanlocationB(Figure57).
5.Ifthecarrierframeisnotcorrect,movecaster
spacerstomakeitan1/8-3/8inch(3-10mm)pitch
(Figure57).Movespacersfromtoporbottomto
makethecorrectpitch.
6.Thetirepressuremayalsobeadjustedslightlyto
makean1/8-3/8inch(3-10mm)pitch.
CheckingtheCarrierFrame
Side-to-SideHeight
Thecarrierframeneedstobeparallelside-to-sidefrom
theground.
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Adjustthetirepressureinthereartiresto
specications;referto,page.
4.MeasurecarrierframeheightatlocationA
(Figure58).
5.MeasurecarrierframeheightatlocationB
(Figure58).
6.Ifthecarrierframeheightisnotthesamemove
spacersfromtoporbottomofcasterwheel,to
makeitlevel.Thetirepressuremayalsobeadjusted
slightlytomakeitlevel.
Figure58
1.CasterWheel4.Sameheightatlocations
AandB
2.CarrierFrame5.Casterspacers
3.Frontheight-of-cutpins
43