Operator's Manual

1.Afteradjustingheight-of-cut,checktheanti-scalp
rollerssothatthereisaminimumof3/8inch
(10mm)clearanceabovetheground(Figure13,
Figure14,Figure15).
2.Ifadjustmentisneeded,removethebolt,washers
andnut(Figure13,Figure14,Figure15).
3.Selectaholepositionsotheanti-scalprollersare
aminimumof3/8inch(10mm)offtheground
(Figure13,Figure14,Figure15).
4.Installtheboltandnut(Figure13,Figure14,
Figure15).
Figure13
40inch,48inch,and52inchMowerDecks
1.Mowerdeck
4.Anti-ScalpRollers
2.Bolt5.Nut
3.Spacer
Figure14
40inch,48inch,and52inchMowerDecks
1.Mowerdeck4.Bushing
2.Bolt
5.Anti-ScalpRollers
3.Spacer
6.Nut
Figure15
36inchMowerDeck
1.Mowerdeck
4.Anti-ScalpRollers
2.Bolt5.Nut
3.Spacer
5.Incertainmowingconditionsandterrain,a
mismatchofcuttingheightmaybeseen.Adjusting
theoutsideanti-scalprollerstotheminimumsetting
of3/8inch(10mm)willhelppreventthemower
deckcuttingtoolowontheoutsideandminimize
themismatch.
AdjustingtheHandleHeight
Thehandlepositioncanbeadjustedtomatchthe
operator’sheightpreference.
18