Operator's Manual

1.Removehairpincotter,washerandclevispin
securingcontrolrodttingtoidlerbracket
(Figure16).
Figure16
1.Controlrodandtting
4.Washer
2.Idlerbracket5.Hairpincotterpin
3.Clevispin6.Rodtting
2.Loosentheupperangebolts(3/8x1inch)and
angenutsecuringhandletorearframe(Figure17).
Figure17
1.Upperhandle5.Uppermountinghole
2.Rearframe
6.Lowermountingholes
3.Flangenut,(3/8inch)
7.Lowposition
4.Flangebolt,(3/8x1inch)
8.Highposition
3.Removethelowerangebolts(3/8x1inch)
andangenutssecuringhandletorearframe
(Figure17).
4.Pivothandletodesiredoperatingpositionand
installlowerangebolts(3/8x1inch)andange
nutsintomountingholes.Tightenallangebolts.
5.Checkthecontrolbarforcorrectadjustment.Refer
toAdjustingtheControlBarinthemaintenance
section.
6.Checktheparkingbrakeadjustment.Referto
CheckingtheBrakesinthemaintenancesection.
AdjustingtheFlowBafe
Themowerdischargeowcanbeadjustedfordifferent
typesofmowingconditions.Positionthecamlockand
bafetogivethebestqualityofcut.
1.DisengagethePTO,movethemotioncontrol
leverstotheneutrallockedpositionandsetthe
parkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Toadjustthecamlock,swingtheleveruptoloosen
thecamlock(Figure18).
4.Adjustthebafeandcamlockintheslottothe
desireddischargeow.
5.Swingtheleverbackovertotightenthebafeand
camlock(Figure18).
6.Ifthecamdoesnotlockthebafeintoplaceoritis
tootight,loosentheleverandthenrotatethecam
lock.Adjustthecamlockuntilthedesiredlocking
pressureisachieved.
Figure18
1.Camlock4.Slot
2.Lever5.Rotatethelevertorelease
orlockthecam
3.Rotatecamtoincreaseor
decreaselockingpressure
PositioningtheFlowBafe
Thefollowingguresareonlyrecommendationsfor
use.Adjustmentswillvarybygrasstype,moisture
content,andheightofgrass.
19