Operator's Manual

ElectricalSystem
Maintenance
ServicingtheFuse
Theelectricalsystemisprotectedbyafuse.Itrequires
nomaintenance.Ifthefuseblowscheckcomponentor
circuitformalfunctionorshort.Toreplacefusepullout
onthefuse(Figure37)toremoveorreplaceit.
Figure37
1.Fuse,7.5amp,bladetype
DriveSystem
Maintenance
AdjustingtheControlBar
1.Checkthegapbetweenuppercontrolbarand
xedbarwithwheeldrivefullyengaged.Thegap
shouldbeapproximately1to1-1/4inch(25-32mm)
(Figure38).
Note:Theuppercontrolbarandxedbarmustbe
parallelwhentheuppercontrolbarisintheengaged,
drive,neutral,orbrakepositions.
Figure38
1.Uppercontrolbar4.Handle
2.Parkingbrakelever
5.1to1-1/4inch(25-32mm)
gap
3.Fixedcontrolbar
2.Checktheoperation.Ifadjustmentisrequired,
removehairpincotter,washerandclevispinsecuring
controlrodttingtoidlerbracket(Figure39).
3.Threadtherodttingupordownontheroduntil
theproperpositionisattainedandinstalltherod
ttingtotheidlerbracketwiththeclevispin,washer
andhairpincotter.
31