Operator's Manual

Figure64
40inch,48inch,and52inchMowerDeckshown
1.MeasurebladeatpointsA
andB
2.Measurefromalevel
surface
Figure65
36inchMowerDeckshown
ChangingtheMowerDeck
Front-to-RearPitch
Changingthefront-to-rearpitchisdonebyadjustingthe
frontheight-of-cutposts.
1.Tochangethefront-to-rearpitch,thefront
height-of-cutpostscanbeadjusted(Figure66).
Figure66
1.CasterWheel
4.Jamnut
2.CarrierFrame
5.Balljoint
3.Frontheight-of-cutpins
2.Toraisethefrontofthedeck,loosenjamnutand
rotatethefrontpinclockwise(Figure66).
3.Tolowerthefrontofthedeck,loosenjamnutand
rotatethefrontpincounterclockwise(Figure66).
4.Positionthebladesfront-to-rear.MeasureatCand
Dlocations(Figure64)fromalevelsurfacetothe
cuttingedgeoftheblades.
5.Checktheside-to-sidelevelingofthecuttingunit.
6.Tightenthejamnuts(Figure66).
CheckingtheMowerDeck
Side-to-SideHeight
1.Adjustthereartirepressuretospecications;refer
toDriveSystemMaintenance,page31.
2.Positionthebladesside-to-side.MeasureatCand
Dlocationsfromalevelsurfacetothecuttingedge
ofbladetips(Figure67).For36inchmowerdecks
useFigure68.
44