Service Manual

LINKAGE

4-6 Floating Deck Mid-Size Service Manual

5. If adjustment is needed, refer to loosen the jam nut,

adjust the hex head screw until proper distance is

achieved and then tighten the jam nut to secure.

Control Linkage Assembly (Fig. 0313):

Fig 0313 PICT-1969a

A. Lower control rod D. Wingnut

B. Wingnut E. Upper control rod

C. Turnbuckle

AB C D E

4. Install 2 bolts and nuts securing the pump adapter

bracket to the pump linkage (Fig. 0311).

Fig 0311 PICT-1983

The distance between the face of the neutral prox-

imity switch and the end of the hex head screw

should be .07” + .02” (1.8 + .5mm) (Fig. 0312).

A. .07” ± .02” (1.8 + .5mm)

3. Position the pump adapter bracket to the pump

linkage (Fig. 0310).

Fig 0312 PICT-1943

Fig 0310 PICT-1989