Service Manual

LINKAGE

4-10 Floating Deck Mid-Size Service Manual

3. Slide the trunnion out of the idler arm (Fig. 0329).

Fig 0329 PICT-0690

Control Linkage & Thumb Latch

Replacement (Pistol Grip Hydro)

Control Linkage & Thumb Latch Removal

18. Install 4 screws (2 on the left, 2 on the right) secur-

ing the control panel cover to the control panel (Fig.

0326).

Fig 0328 PICT-0687

Fig 0327 ﬁ g. 10 G004912

Fig 0326 PICT-1921

The following procedures are the same for both the right

side and left side handle bars.

1. Turn the engine off and remove the key from the

ignition.

2. Remove the e-clip from the back side of the trunnion

on the lower end of the control rod (Fig. 0328).