Service Manual

LINKAGE

4-13Floating Deck Mid-Size Service Manual

Control Linkage & Thumb Latch Installation

1. Install the bushing sleeves into the drive lever

handle (Fig. 0339).

Fig 0339 PICT-0703a

2. Install the drive lever bushing into the drive lever

handle (Fig. 0340).

12. Remove the bushing sleeves from the drive lever

handle (Fig. 0338).

Fig 0340 PICT-0701

Fig 0338 PICT-0702a

3. Assemble the drive lever assembly to the handle bar

with a bolt (Fig. 0341).

Fig 0341 PICT-0700