Service Manual

LINKAGE
4-16 Floating Deck Mid-Size Service Manual
4
13. Adjust the control rod so there is a .19” to .25” (.48 to
.64cm) space between the control rod clevis pin and
the bottom of the thumb latch slot (Fig. 0351).
Fig 0351 PICT-0715
14. Install a hairpin cotter into the clevis pin to secure
the control rod to the thumb latch assembly (Fig.
0352).
12. Assemble the upper end of the control rod to the
drive lever assembly by inserting a clevis pin (Fig.
0350).
Fig 0352 PICT-0691 Fig 0350 PICT-0714
15. Start the machine and operate the controls to ensure
proper operation. Adjust as necessary.