Service Manual

LINKAGE
4-26 Floating Deck Mid-Size Service Manual
4
15. Position the idler/brake rod assembly onto the
machine so the torsion spring is hooked onto the
frame. (Fig. 0389).
17. Install a nut onto the idler pivot bolt (Fig. 0391).
Fig 0389 PICT-1783
Fig 0391 PICT-1758
18. Insert the lower end of the brake rod into the brake
arm assembly (Fig. 0392).
16. Align the idler pivot with the mounting hole on the
frame and insert the idler pivot bolt (Fig. 0390).
Fig 0392 PICT-1757
Fig 0390 PICT-1759