Service Manual

LINKAGE
4-34 Floating Deck Mid-Size Service Manual
4
11. Install the spring onto the adjustment stud (Fig.
0421).
13. Install a nut onto the top end of the adjustment
stud. Tighten the nut until there are approximately 5
threads protruding past the nut (Fig. 0423).
Fig 0421 PICT-1009
Fig 0423 PICT-1012a
14. Adjust the Neutral Stud. Refer to “Neutral Stud
Adjustment” on page 4-126.
12. Install a washer onto the adjustment stud (Fig.
0422).
Fig 0422 PICT-1011a