Service Manual

LINKAGE

4-36 Floating Deck Mid-Size Service Manual

4. Repeat steps 1 thru 3 to remove the right side OPC

lever.

5. Remove the extension spring located under the

control panel (Fig. 0428).

7. Remove the PTO switch from the control panel (Fig.

0430).

Fig 0428 PICT-0727

Fig 0430 PICT-0729a

8. Remove the OPC rod by sliding it to the far right,

dropping the left side of the rod, and remove the rod

through the left side (Fig. 0431).

6. Unplug the wire harness from the PTO switch (Fig.

0429).

Fig 0431 PICT-0731

Fig 0429 PICT-0728