Service Manual

LINKAGE
4-40 Floating Deck Mid-Size Service Manual
4
3. Remove the cotter pin from the lower end of the
speed control rod (Fig. 0444).
5. Remove the nut from the pivoting sprung bolt (Fig.
0446).
Fig 0444 PICT-0747 Fig 0446 PICT-0751
6. Remove the middle bolt and spring assembly secur-
ing the speed control handle to the control panel
(Fig. 0447).
4. Remove the washer and speed control rod assembly
from the tab on the speed control crank assembly
and remove it from the machine (Fig. 0445).
Fig 0447 PICT-0754 Fig 0445 PICT-0750