Service Manual

LINKAGE
4-53Floating Deck Mid-Size Service Manual
4
28. Position a spring onto the bolt assembly (Fig. 0496).
Fig 0496 PICT-0849a
29. Install a lock nut onto the bolt (Fig. 0497).
Tighten the nut until approximately 3 threads stick
out past the nut (Fig. 0498).
Note: Do not collapse the spring.
Fig 0497 PICT-0850
Fig 0498 PICT-0852
30. Position a washer between the two plates and align
the ID of the washer with the center hole in the lever
plates (Fig. 0499).
Fig 0499 PICT-0854a