Service Manual

LINKAGE

4-54 Floating Deck Mid-Size Service Manual

33. Loosely install the middle bolt, spring and nut,

making sure the bolt goes through the washer in

between the plates (Fig. 0502).

Fig 0502 PICT-0868

Tighten the middle nut until approximately 3 threads

stick out past the nut (Fig. 0503).

Note: Do not collapse the spring.

Fig 0503 PICT-0872a

32. Loosely install the upper and lower bolts and nuts

(Fig. 0501).

Fig 0501 PICT-0864

31. Position the speed control handle (Fig. 0500).

Fig 0500 PICT-0857a