Service Manual

LINKAGE

4-60 Floating Deck Mid-Size Service Manual

12. Remove the clevis pin (Fig. 0524).

Fig 0524 PICT-0915

13. Loosen the 2 set screws securing the drive lever

swivel to the hydro pump shaft (Fig. 0525).

Note: There is an access hole located in the frame

below the drive lever swivel.

11. Remove the hairpin cotter from the clevis pin se-

curing the neutral adjustment stud yoke to the drive

lever swivel (Fig. 0523).

Fig 0525 PICT-0916

Fig 0523 PICT-0914

14. Remove the drive lever swivel from the hydro pump

shaft (Fig. 0526).

Fig 0526 PICT-0917