Service Manual

LINKAGE

4-62 Floating Deck Mid-Size Service Manual

4. Apply thread locking compound to both drive lever

swivel set screws (Fig. 0532).

Fig 0532 PICT-0922a

5. Install the 2 set screws securing the drive lever

swivel to the hydro pump shaft (Fig. 0533).

Note: There is an access hole located in the frame

below the drive lever swivel.

3. Position the drive lever swivel through the frame and

onto the hydro pump shaft (Fig. 0531).

Fig 0533 PICT-0916

Fig 0531 PICT-0917

6. Position the neutral adjustment stud yoke to the

drive lever swivel and install a clevis pin (Fig. 0534).

Fig 0534 PICT-0915