Service Manual

LINKAGE
4-64 Floating Deck Mid-Size Service Manual
4
12. Position the side fl ange bearing to the side plate
(Fig. 0540).
Fig 0540 PICT-0907
13. Install a fl at washer onto the 2 bolts used to secure
the bearing to the side plate. Loosely install the
bearing to the side plate with the 2 bolt assemblies
and nuts (Fig. 0541).
11. Install an e-clip onto the trunnion on the lower end of
the drive lever rod (Fig. 0539).
Fig 0541 PICT-1015
Fig 0539 PICT-0908
14. Position the side plate so the bearing is installed on
the hydro control shaft (Fig. 0542).
Fig 0542 PICT-1016