Service Manual

LINKAGE
4-67Floating Deck Mid-Size Service Manual
4
3. Open the locking tab on the front of the Operator
Presence Control (OPC) switch. Unplug the harness
from the OPC (Fig. 0549).
5. While holding the lock down, draw the wire and
spade terminal out of the connector (Fig. 0551).
Fig 0549 PICT-1670a
Fig 0551 PICT-1692
6. Repeat steps 2 and 3 to remove the second terminal
from the switch.
7. Pull the wire harness from the center tube in the
T-bar (Fig. 0552).
4. Depress the connector lock with a small fl at screw-
driver (Fig. 0550).
Fig 0552 PICT-1694a
Fig 0550 PICT-1689