Service Manual

LINKAGE
4-71Floating Deck Mid-Size Service Manual
4
21. Remove the 2 rubber grommets from the T-Bar (Fig.
0565).
23. Remove the clevis pin (Fig. 0567).
Fig 0565 PICT-1708a
Fig 0567 PICT-1712
24. Repeat steps 20 and 21 to remove the cotter pin and
clevis from the opposite side.
25. Remove the control pivot assembly from the handle
assembly (Fig. 0568).
22. Remove the cotter pin from the clevis pin securing
the control pivot assembly to the handle bar (Fig.
0566).
Fig 0568 PICT-1713a
Fig 0566 PICT-1710