Service Manual

LINKAGE
4-79Floating Deck Mid-Size Service Manual
4
21. Insert the clevis pin into the idler arm (Fig. 0597). 23. Install a hairpin cotter into the clevis pin (Fig. 0599).
Fig 0597 PICT-1675
Fig 0599 PICT-1672a
24. Repeat steps 17 - 23 to install the control rod on the
opposite side.
25. Feed the wire harness up through the center T-bar
tube (Fig. 0600).
22. Install a washer onto the clevis pin (Fig. 0598).
Fig 0600 PICT-1694a
Fig 0598 PICT-1740