Service Manual

LINKAGE

4-85Floating Deck Mid-Size Service Manual

19. Remove the cable tie securing the harness to the

throttle cable (Fig. 0620).

Fig 0620 PICT-2043

20. Remove the cable tie securing the harness to the

frame (left of the fuel tank, above the parking brake)

(Fig. 0621).

23. Remove the throttle and choke cables from the cable

clamps and disconnect the z-bends from the control

linkage (Fig. 0623).

A. Choke B. Throttle

Fig 0621 PICT-2047

Fig 0623 PICT-0310

21. Pull the harness through the frame and lay it across

the engine so it is out of the way of the handle.

22. At the front of the engine, loosen the cable clamps

securing the throttle (bottom) and choke (top) cables

to the engine (Fig. 0622).

Fig 0622 PICT-0309