Service Manual

LINKAGE

4-98 Floating Deck Mid-Size Service Manual

20. With the right control lever in the operating position,

there should be .10” (2.5mm) gap between the OPC

switch plunger and the control arm tab. Adjust the

switch location as needed (Fig. 0672).

Fig 0672 PICT-2104

21. Install the spring onto the right hand motion control

lever assembly (Fig. 0673).

23. Slide a washer onto the upper end of the control

linkage rod (Fig. 0675).

Fig 0673 PICT-2071

Fig 0675 PICT-2065

22. Insert the upper end of the control linkage rod into

the tab on the control handle (Fig. 0674).

Fig 0674 PICT-2066