Service Manual

LINKAGE

4-101Floating Deck Mid-Size Service Manual

33. Hook the z-bend of the choke cable to the choke

control lever and loosely clamp the outer housing of

the choke cable into the cable clamp (Fig. 0684).

Fig 0684 PICT-0331

34. Move the choke control knob to the “open” position

(Fig. 0685).

36. Pull up the outer housing of the choke cable until the

inner wire has almost no slack and tighten the cable

clamp bolt (Fig. 0687).

Fig 0685 PICT-0332a

Fig 0687 PICT-0334

35. Ensure the carburetor choke plate is fully open (Fig.

0686).

Note: The air ﬁ lter has been removed to show the

carburetor choke plate.

Fig 0686 PICT-0333