Service Manual

LINKAGE
4-116 Floating Deck Mid-Size Service Manual
4
10. Remove the 2 screws and nuts securing the throttle
handle assembly to the left handle (Fig. 0745).
Fig 0745 PICT-0667
11. Remove the throttle handle cable and gasket as-
sembly out through the control panel (Fig. 0746).
9. Cut the cable ties at the following locations (Fig.
0744).
8. T2 Models: Remove the cable tie securing the
harness to the throttle cable (Fig. 0743).
Fig 0746 PICT-0670a
Fig 0743 PICT-2043
Fig 0744 PICT-2051
A. Throttle/neutral proximity switch wire/frame
B. Throttle/frame
A
A
B
B