Service Manual

LINKAGE

4-120 Floating Deck Mid-Size Service Manual

12. Pull on the outer cable housing until the inner wire

has almost no slack. Tighten the cable clamp bolt

(Fig. 0759).

Fig 0759 PICT-0682

13. Install a cable tie securing the throttle cable to the

left handle bar. Cut off excess (Fig. 0760).

15. Tighten the R-clamp screw securing the throttle

cable to the frame (Fig. 0762).

Fig 0760 PICT-0683a

Fig 0762 PICT-0661

16. Move the throttle lever to the slow position. Make

sure that the carburetor throttle valve moves

smoothly to the closed position.

14. Install a cable tie securing the throttle cable to the

choke cable above the left tire. Cut off excess (Fig.

0761).

Fig 0761 PICT-0684a