Service Manual

ENGINE

5-9Floating Deck Mid-Size Service Manual

Engine Installation - Pistol Grip Hydro

38. Carefully lift the engine off the chassis.

1. Carefully position the engine on the chassis.

2. Apply thread locking compound to the 4 engine

mounting bolts (Fig. 0819).

Fig 0819 PICT-0322

3. Insert the rear right engine mounting bolt up through

the chassis and engine mounting hole. Install the

star washer, harness ground wires and negative

(black) battery cable onto the bolt. Loosely install the

nut onto the bolt (Fig. 0820).

36. Remove the remaining 3 engine mounting bolts and

nuts securing the engine to the chassis (Fig. 0818).

Fig 0820 PICT-0321a

Fig 0818 PICT-0319

4. Loosely install the remaining 3 engine mounting

bolts and nuts (Fig. 0821).

Fig 0821 PICT-0319