Service Manual

ENGINE
5-12 Floating Deck Mid-Size Service Manual
5
14. Move the choke control knob to the “choke“ position
(Fig. 0831).
Fig 0831 PICT-0336
15. Ensure the carburetor choke plate is fully closed
(Fig. 0832).
13. Pull the outer housing of the choke cable until the
inner wire has almost no slack and tighten the cable
clamp bolt (Fig. 0830).
Fig 0832 PICT-0335
Fig 0830 PICT-0334
16. Make sure the choke plate turns from the fully closed
position to the fully open position when actuating the
choke control knob.
17. Hook the z-bend of the throttle cable to the throttle
control lever and loosely clamp the outer housing of
the throttle cable into the cable clamp (Fig. 0833).
Fig 0833 PICT-0338