Service Manual

ENGINE

5-14 Floating Deck Mid-Size Service Manual

22. Install the square key into the engine crankshaft

keyway (Fig. 0838).

Fig 0838 PICT-0304

23. Slide the drive pulley onto the engine crankshaft.

Ensure that the long side of the hub is installed

toward the engine (Fig. 0839).

Fig 0839 PICT-0303

24. Route the hydro drive belt around the engine crank-

shaft pulley, idler pulley and hydro pulleys (Fig.

0840).

Fig 0840 PICT-0348a

25. Using a spring removal tool (Toro P/N 92-5771),

install the hydro drive idler spring (Fig. 0841).

Fig 0841 PICT-0349