Service Manual

SPECIFICATIONS
2-16 Floating Deck Mid-Size Service Manual
2
International Hydro with T-Bar (T2) Controls cont.
Mower Drive:
Mower Engagement: Engine mounted electric clutch
Clutch Adjustment:
Periodic air gap adjustment required - .018” + .003” (0.45 + 0.0762mm)
PTO Drive Belt: HB section with Aramid (Kevlar) cords and dry clutching envelope
PTO Idler: Spring loaded pivot hub with grease fi tting for lubrication / 91cm (36”) deck includes
additional fi xed idler.
Deck Drive Belt: HA section with Aramid (Kevlar) cords and standard (non-clutching) envelope
Deck Drive Idler: Spring loaded / 91cm (36”) decks have non-greaseable pivot hub
Mower Decks:
HOC Range: 1” (2.5cm) to 4.50” (11cm) in 1/4” (0.6cm) increments
Blades: Two .250” (6.3mm) thick heat treated steel blades
Spindles: Machined steel 1.00” (25mm) diameter shaft
Spindle Housing: Ductile cast iron, 9-3/8” (24cm) diameter mounted with six bolts
Bearings: Sealed ball bearings permanently lubricated with high temperature grease
Construction: 7 gauge (.179” (4.5mm)) steel welded construction
Blade Tip Speed: 21,070 ft/m calculated @ 2900 engine rpm
Anti-Scalp Rollers: 2 front mounted
Skid Plate: Standard
Adjustable Discharge Baffl e: Standard
Rubber Discharge Chute: Standard
Unit Dimensions:
Model No. Height
Width Defl ector
Down
Width Defl ector
Raised Length Weight*
30032 46” (117cm) 51.1” (130cm) 37.2” (94cm) 78.5” (199cm) 667 lbs. (302kg)
*Estimated operating weight